Bruce's MRCAT biz
![[Figure 1]](/BruceRavel?action=AttachFile&do=get&target=139c486.jpg "Figure 1 (click for full size image)")
Figure 1 Bruce's hideous mug
![[Figure 2]](/BruceRavel?action=AttachFile&do=get&target=clean_hutch.png "Figure 2 (click for full size image)")
Figure 2 Clean is clean
Bending Magnet
BendingMagnetUpgrade : Main bending magnet page
BendingMagnetUpgrade/PurchasingList : The list of things to buy in advance of the mono's arrival
BendingMagnetUpgrade/SampleRobot: Notes on the design of the sample handling system
Insertion Device
UsingTheBeamline : Notes about using 10ID
CoolingAndWarmingTheMono : A HOWTO for the mono cryocooler
MedSolutions : Notes on ways of improving service and function of the MED
Several beamline improvements I'd like to see at MRCAT
- ID Line
- Gas handling and vacuum manifold well integrated into the beamline, preferably with computer controllable components
- Decouple the XAS rail from the goniometer table
- Removal of the overhead cable tray running down the center of the hutch so that the delta arm of the goniometer can be used
- Easy-to-use, configurable, modifiable flight path hardware that can be evacuated or filled with helium
- Redesign the XAS sample stage
- Dry lab
- Clean/organize/catalog the dry lab
- Old projects
HutchReWiringProject : Notes about the January 2006 project to rewire the 10ID-B hutch. Some of this information might be out-of-date. See SignalAndControlPanels for the latest scoop.
- Linkage
- System Info
- <bravel AT anl DOT gov>
- Subpages
/NoteBook | /ToDo | /IsDone | /EsafProblem